I. LEATHER INDUSTRY CHEMICALS

i. Basic Chromium Sulphate
   a)There are two types of Basic Chromium Sulphate available - which are as follows:
       a) Uniphos I
       b) Uniphos II

       The details of the above products are given below:

     Uniphos I:

     It is a Basic Chromium Sulphate complex reduced with molasses. It is spray dried      powder, free flowing, leaf green in colour, readily soluble even in cold water.

     It is used for chrome tanning of all types of hides/skins. Also used in dyeing of      mineral khaki cloth.

     Specification of the product is as follows:
     Chromium Oxide as Cr2O3 (%)........24.00
     Schorlemmer Basicity (%)........33.00
     Neutrals Salts as Na2SO4 (%)........33.00
     pH of aqueous solution (%)..........3.00

     Packing will be in 25 kg Kraft Paper bags with polythene liner.

     Uniphos II:

     It is a Basic Chromium Sulphate complex reduced with molasses. It is spray dried      powder, free flowing, leaf green in colour, readily solouble even in cold water.

     It is used for chrome tanning of all types of hides/skins.

     Specification of the product is as follows:
     Chromium Oxide as Cr2O3 (%)........24.00
     Schorlemmer Basicity (%)........41.00
     Neutrals Salts as Na2SO4 (%)........36.00
     pH of aqueous solution (%)..........3.20

     Packing will be in 25 KG KRAFT PAPER bags with polythene liner.

   b) Packing will be in 50 Kg HDPE bags with liner. Quantity per FCL 22 MT per FCL

   c) Application: Tanning of leather


ii. Calcium hypochlorite
   a) Specification of the product will be as follows:
       Available Chlorine : 65 %
       Ca(OH)2 : 2 % Maximum
       CaCO3 : 6 % Maximum
       CaCl : 2 % Maximum
       NaCl : 17 % Maximum
       Moisture & Others : 8 % Maximum
   b) Packing will be in 45 Kg HDPE carbouys. 400 carbouys per 20' FCL
   c) Algicide, bactericide, deodorant, disinfectant, fungicide, in sugar refining,        oxidizing agent, bleaching agent

iii.Caustic Soda - Flakes
    a) The specification of the product is as follows:
        NaOH % by weight min : 99.5
        Na2Co3 % by weight max : 0.4
        NaCl% by weight max : 0.1
        Na2SO4 % by weight max : 0.1
        SiO2% by wt. max : 0.02
        Iron (as Fe) ppm max : 20
        Manganese (as Mn) ppm max : 1.0
        Copper (as Cu) ppm max : 2.0
    b) Packing will be in 50 kg HDPE bags with HDPE liner.
        Quantity per FCL will be 21 MT - 420 bags per FCL
    c) Applications:
        Acid neutralization
        Manufacture of Soaps and Detergents
        Manufacture of Sodium Salts
        Pulp and paper industry
        Petroleum Refining
        Dyes and pharmaceutical industries
        Rayon manufacture
        Alkaloid manufacture
        Manufacture of plastics
        Cellophane, Aluminum processor
        Rubber reclamation
        Refining vegetable oils


iv. Caustic Soda - Prills
    a) Specification of the product is as follows:
        NaOH content : 99.50% on dry basis min.
        Iron as Fe : 3 ppm max
        Sodium Carbonate : 0.4% max.
        Chloride as NaCl : 0.1% max.
        Bulk Density : 1.136 gm/cc
        Granulation : Average 700 +/- 100
        Microns Range : 250 - 1300 Microns
    b) Packing will be in 25 kg HDPE bags with polythene liner.
        In one FCL, we can despatch 21 MT (840 bags per FCL).
    c) It is used in acid neutralizing, making sodium salts, dues and pharmaceutical                industries.
    d) Applications:
        Universally applicable
        Due to the superior characteristics of prills, flakes are often substituted by         prills.
        Acid neutralization
        Manufacture of Soaps and Detergents
        Manufacture of Sodium Salts
        Pulp and paper industry
        Petroleum Refining
        Dyes and pharmaceutical industries
        Rayon manufacture
        Alkaloid manufacture
        Manufacture of plastics
        Cellophane, Aluminum processor
        Rubber reclamation
        Refining vegetable oils