IV. SUGAR INDUSTRY CHEMICALS

i. Aluminium Sulphate (Non-ferric)
   a) The specification is as follows:
       Alumina as Al2O3 : 17% Minimum
       pH of 5% solution : Not less than 2.8
       Iron as Fe : 100 PPM
       Insoluble matter : 0.3 % Maximum
   b) Packing will be in 50 Kg HDPE bags with PP liner. In one FCL, 21.5 MT
       can be stuffed.
   c) Application:   It is used for water treatment, water puirification, paper
       industry.


ii. Acid Inhibitors
   a) Specification of the product will be as follows:
       Physical state : Homogeneous, organic liquid, free from visible Impurities
       Qualitative test for presence of arsenic : Negative
       Pour point, deg C (Max) : 12

       Corrosion Test :
       Pressure, PSI : Atmospheric
       Test temperature deg.C : 100 + 2
       Condition of test : Static
       Duration of test hours : 6
       Acid volume/test coupon surface area,ml/sq.inch. : 75
       Type of steal : N - 80
       Type of acid : Hydrochloric acid (15%w/w)
       Concentration of inhibitor : 10 ml/litre
       Corrosion rate without pitting gm/cm2 (Max) : 0.024
    b) Packing will be in 200 Ltrs HDPE barrels
 

iii. Caustic Soda - Flakes
    a) The specification of the product is as follows:
        NaOH % by weight min : 99.5
        Na2Co3 % by weight max : 0.4
        NaCl% by weight max : 0.1
        Na2SO4 % by weight max : 0.1
        SiO2% by wt. max : 0.02
        Iron (as Fe) ppm max : 20
        Manganese (as Mn) ppm max : 1.0
        Copper (as Cu) ppm max : 2.0
    b) Packing will be in 50 kg HDPE bags with HDPE liner.
        Quantity per FCL will be 21 MT - 420 bags per FCL
    c) Applications:
        Acid neutralization
        Manufacture of Soaps and Detergents
        Manufacture of Sodium Salts
        Pulp and paper industry
        Petroleum Refining
        Dyes and pharmaceutical industries
        Rayon manufacture
        Alkaloid manufacture
        Manufacture of plastics
        Cellophane, Aluminum processor
        Rubber reclamation
        Refining vegetable oils


iv. Caustic Soda - Prills
    a) Specification of the product is as follows:
        NaOH content : 99.50% on dry basis min.
        Iron as Fe : 3 ppm max
        Sodium Carbonate : 0.4% max.
        Chloride as NaCl : 0.1% max.
        Bulk Density : 1.136 gm/cc
        Granulation : Average 700 +/- 100
        Microns Range : 250 - 1300 Microns
    b) Packing will be in 25 kg HDPE bags with polythene liner.
        In one FCL, we can despatch 21 MT (840 bags per FCL).
    c) It is used in acid neutralizing, making sodium salts, dues and pharmaceutical                industries.
    d) Applications:
        Universally applicable
        Due to the superior characteristics of prills, flakes are often substituted by         prills.
        Acid neutralization
        Manufacture of Soaps and Detergents
        Manufacture of Sodium Salts
        Pulp and paper industry
        Petroleum Refining
        Dyes and pharmaceutical industries
        Rayon manufacture
        Alkaloid manufacture
        Manufacture of plastics
        Cellophane, Aluminum processor
        Rubber reclamation
        Refining vegetable oils


v. Glacial Acetic Acid
   a) Specification of the product is:
       Description : Clear liquid, free from suspended matter having pungent odour
       Acetic Acid content : 99.5 %
       Heavy metals including iron : 0.002 %
       Chlorides as Cl : 0.0035 % maximum by wt.
       Sulphate as SO4 : 0.0035 % maximum by wt.
       Residue on evaporation : 0.02 % maximum
       Formic acid (HCOOH) : 0.25 % maximum
       Acetaldehyde (CH3CHO) : 0.1 % maximum
   b) Packing will be in 35 kg. kg carbuoys - 576 carbuoys in one FCL (20.160 MT)


vi. Hydrochloric Acid
   a) Specification is as follows:
       Hydrochloric acid content : 32% minimum
       Specific gravity at 27 deg C: 1.155
       Residue on ignition : 0.01% maximum
       Sulphate as H2SO4 : 20 mg/kg maximum
       Iron as Fe : 10 mg/kg maximum
       Free Chlorine and Bromine : 20 mg/kg maximum
       Sulphate as SO2 : 50 mg/kg maximum
    b) Packing will be in 240 Kg HMHDPE barrels.
       80 drums (19.2 MT) per 20' FCL.
       OR
       Packing will be in 40 Kg HMHDPE carbouys.
       500 carbouys (20 MT) per 20' FCL.
   c) Applications:
       It finds use in metal cleaning, descaling, bleaching, hydrolysing agent and        industrial solvent for inorganic compounds.
       Steel pickling : Food processing
       Ore refining : Activation of Petroleum Wells
       Hydrolyzing agent : Catalyst in organic process
       Scale removal : Removal of heavy metal from carbon black and activated carbon

vii. Phosphoric Acid 85% (Technical Grade & Food Grade)
   a) The specification is as follows:
        H3 PO4 Concentration 85% + or - 0.5%
        Iron as Fe 10 Max PPM
        Sulphate as SO4 150 - 300 PPM
        Chloride as Cl 40 Max PPM
        Fluoride as F 100 Max
        Ca and Mg 50 Max PPM
        Heavy Metals as Pb 10 Max PPM
        Colour Water White
   b) Packing will be in 340 kg HMHDPE barrels. Quantity per 20' FCL will be 21 MT.
   c) Applications:
       Pretreatment Chemicals
       Waste Water Treatment Chemicals
       Sugar Refining
       Activated Carbon
       Anodising
       Soaps and Detergents
       Stabilising Agent


ix. Sulphurin Roll
   a) Specification of the product is:
        Purity of the produce is 99.9% and it is free from Arsenic, Selenium and         Tellurium.
    b) Packing will be in 50 kg HDPE bags.
    c) Application:
        It is used in sugar industry.