IX. SPECIALITYCHEMICALS

i. Acid Inhibitors
   a) Specification of the product will be as follows:
       Physical state : Homogeneous, organic liquid, free from visible Impurities
       Qualitative test for presence of arsenic : Negative
       Pour point, deg C (Max) : 12
       Corrosion Test :
       Pressure, PSI : Atmospheric
       Test temperature deg.C : 100 + 2
       Condition of test : Static
       Duration of test hours : 6
       Acid volume/test coupon surface area,ml/sq.inch. : 75
       Type of steal : N - 80
       Type of acid : Hydrochloric acid (15%w/w)
       Concentration of inhibitor : 10 ml/litre
       Corrosion rate without pitting gm/cm2 (Max) : 0.024
    b) Packing will be in 200 Ltrs HDPE barrels
 

ii. Aluminium Chloride Anhydrous
   a) Specification of the product will be as follows:
       Purity : 99% Minimum
       Water Insolubles : 0.05% Maximum
       Non-volatiles : 0.90% Maximum
       Free Aluminium : 50 PPM Maximum
       Iron : 100 PPM Maximum
       Other Metals : 0.015% Maximum
        Particle size : 2 mm to 9 mm (90% Minimum)
   b) Packing:
       1. 25 Kgs bag packing/1000 Kgs Jumbo packing duly palletized and shrink            wrapped
       2. 250 Kgs UN approved M.S. drum packing

iii. Bentonite Granules
   a) Specification of the product is:
       Appearance : Black Calcined Free From
      Iron & Extraneous Matter
      Moisture : 1.0 % Max
      pH Of 10% Slurry Indistilled Water : 7.5 To 8.5
      Sieve :
                 % Retention On 1.4 Mm 14 Astm Nil
                 0.5 Mm 35 Astm 99.0 %
      Sorptivity With Kerosene : 25 % M/M Min.
      Bulk Density : 0.9 To 0.93
    b) Packing will be in 1 MT Jumbo bags
   

iv. Cuprous Chloride Anhydrous
    a) The specification is as follows:
         Appearance : Blackish - brownish pearls (beads)
        Assay : 97 % m/m min.
        Copper : 63 % m/m min.
        Soluble copper : 1.0 % m/m max.
        Iron : 0.06 % max.
        Acid insoluble matter : 0.2 % m/m max.
    b) Packing will be in LDPE lined HDPE of 25 Kgs.


v. Diethyl Sulphate
   a) Specification of the product is:
       Physcial/Chemical Data
         1. Physical State : Liquid Colourless
         2. Chemical Formula : (C2H5)2SO4
         3. Molecular weight : 154.18
         4. Freezing Point : - 24.5 deg C
         5. Boiling Point at 760 mm pressure : 208 deg C (Decomposition)
         6. Density at 23 deg C : 1.1774
         7. Refractive index : n20D = 1.40037
         8. Surface Tension at dynes/cm at 149 deg C : 34.02
         9. Flash Point : 121 deg C (Open cup)
         10.Vapour Density : 5.31
         11. Vapour Pressure at 47 deg C : 1 mm (Hg)
         12. Viscosity : 1.79 cp at 20 deg C

       Chemical properties of Diethyl Sulphate
         i. Colourless oily liquid with etheral colour. Darkens with age.
         ii. Soluble in organic solvents like alcohol and ether
         iii. Sparingly soluble in water wherein it decomposes slowly to Alcohol and Ethyl               hydrogen sulphate
         iv. Distillable : Can be distilled without decomposition at sub-atmospheric                        pressure decomposition slowly only on heating. Decomposes at temperature               approaching its normal boiling point of 208 deg. C. Heating to 220 deg C               causes decomposition to CO2, Ethylene, SO2, Water and Carbon.
    b) Packing will be in 235 KGs HMHDPE barrels. Quantity per 20 FT' FCL 18.800 MT         per FCL (80 barrels can be stuffed in one 20' FT container).

vi. 2,6 - Dichloro 4 -Amino Phenol

vii. 5 - Chloro 8-Hydroxy Quinoline

viii. Methyl Iodide

ix. 3 - Bromo Anisole